Microducts
Microducts and assemblies in various dimensions for interior and exterior use
Types of microducts
Microducts and -assemblies are used for FTTx network extensions. There is a broad selection of ducts available for direct burial installation, in existing ducts, in air as well as for indoor applications.
Thick and thin walled microducts are available .
Thick walled microducts have a solid wall thickness that is robust enough to protect the optical fibers running inside of them. Typical dimensions for the thick walled microducts (OD/ID) are 7/3.5mm, 10/6mm, 12/8mm, 14/10mm and 16/12mm.
Thin walled microducts have lower wall thickness. Usually they are augmented with one or more outer layers of protection that makes these ducts robust enough for the application. Typical dimensions of the thin walled micro tubes are (OD/ID) 3/2mm, 5/3.5mm, 10/8 and 12/10mm
Advantages
- Product Range: The right duct for your application
- Accessory: A wide range of accessories for the micro tubes is available
- Cable and Ducts: The use of cables and ducts from the same manufacturer ensures optimal installation
Products
Thick walled Microducts
Microduct 7/3.5mm
Microduct 10/6mm
Microduct 12/8mm
Microduct 14/10mm
Microduct 16/12mm
Thin walled Microducts
Microduct 5/3.5mm
Microduct 10/8mm
Microduct 10/8mm
Microducts and assemblies with up to 7 Ducts
Product data sheet Subduct
Product data sheet Assemblies
Microduct 12/10mm
Microduct 12/10mm
Microducts and assemblies with up to 7 Ducts
Product data sheet Subduct
Product data sheet Assemblies
Microducts for indoor application
Microducts Indoor 3/2mm
Microducts Indoor 3/2mm
Microducts for indoor applications, made of high quality flame retarding and halogen free material, and assemblies with up to 24 ducts
Product data sheet
Microduct Indoor 5/3.5mm
Microduct Indoor 5/3.5mm
Microducts for indoor applications, made of high quality flame retarding and halogen free material, and assemblies with up to 24 ducts
Product data sheet
Microducts Indoor 10/8mm und 12/10mm
Microducts Indoor 10/8mm und 12/10mm
Microducts for indoor applications, made of high quality flame retarding and halogen free material, and assemblies with up to 7 ducts
Product data sheet
Microducts for special applications
BRUduct
BRUduct
Special assemblies with 3 microducts for installation in urban water galleries and sewers
Product data sheet
Microducts for aerial installation
Microducts for aerial installation
Microducts and -assemblies with dielectric element for self-supporting installation on poles
Product data sheet
Tools and accessories for the handling of the microducts you can find here
Patrick Meier
Product Manager Telecom
patrick.meier@solifos.com
Contact Person